Roland Cloud Jupiter-8 (download)

Authentic recreation of the Roland Jupiter-8 synthesizer in VST and AU format for your DAW.

€ 164,00
SKU
JUP8KEY
Op Voorraad

Released in 1981, the JUPITER-8 is one of the most celebrated and sought-after polysynths of all time. This meticulous plug-in reproduction is accurate down to the circuit level, while also enhancing the original spec with modern features.

Produced between 1981 and 1984, the JUPITER-8 was the pinnacle of Roland synthesizer engineering. Master-crafted with a now-iconic design, the eight-voice polyphonic synthesizer boasted deep programmability and a sweeping dynamic range.

The JUPITER-8 was a must-have for professional synth players and well-equipped studios throughout the ‘80s. Beloved for its robust analog sound and hands-on programmability, it’s famous for its unmistakably lush pads and cosmic leads. Named after the largest planet in the solar system, the list of hits featuring the instrument is huge and diverse.

The JUPITER-8 Software Synthesizer is a detailed recreation of the original, capable of the same rich pads, tectonic basses, and evocative leads as its hardware counterpart. Featuring eight-voice polyphony, 16 individual analog oscillators, and two or four-pole resonant filters, the virtual JUPITER-8 is a wildly customizable composition tool. From cross modulation to oscillator sync, the synth’s expansive effects parameters reward deep exploration. Newly added modern features include:

  • Onboard reverb and tempo-syncing delay
  • Tempo-syncing LFO that locks to your project
  • Extended oscillator range
  • Condition knob adjusts the sound of the JUPITER-8—clean and pristine to warm and broken in

The JUPITER-8 also supports our PLUG-OUT format, providing intuitive, hands-on operation with Roland's SYSTEM-8 hardware synth. Parameters are automatically mapped to the SYSTEM-8's controls, giving you a full-featured JUPITER-8 you can take to the stage without a computer. It's also possible to use the SYSTEM-8 or a Roland Boutique JP-08 for one-to-one, hands-on control of the software plug-in.

Specifications :

Synth :

  • Maximum Polyphony: 8 voice
  • LFO:
    ◦ Waveform (SINE, TRIANGLE, SAW, SQUARE, RND1, RND2)
    ◦ Rate
    ◦ Delay Time
    ◦ KEY TRIGGER (ON, OFF)
    ◦ TRIGGER ENVELOPE (ON, OFF)
  • VCO Modulation:
    ◦ Modulation (VCO-1, BOTH, VCO-2)
    ◦ LFO Modulation Depth
    ◦ ENV-1 Modulation Depth
    ◦ Pulse Width Modulation(PWM)
    ◦ Pulse Width Modulation(PWM) Switch (MANUAL, LFO, ENV1+, ENV1-, ENV1+, ENV1-)
  • VCO-1:
    ◦ Waveform (SAW, PWM, TRIANGLE, SINE, SQUARE, NOISE)
    ◦ Range (64', 32', 16', 8', 4', 2')
    ◦ Cross Modulation
  • VCO-2:
    ◦ Waveform (SAW, PWM, TRIANGLE, SINE, SQUARE, NOISE)
    ◦ Range (64', 32', 16', 8', 4', 2')
    ◦ Oscillator Sync
  • Source Mixer:
    ◦ VCO-1 Level
    ◦ VCO-2 Level
  • HPF: Cutoff Frequency
  • VCF:
    ◦ Cutoff Frequency
    ◦ Resonance
    ◦ Slope (-24 dB, -18 dB, -12 dB)
    ◦ ENV Modulation Depth
    ◦ ENV Modulation Switch (ENV-1, ENV-2)
    ◦ LFO Modulation Depth
    ◦ Key Follow
    ◦ Velocity Sense
  • VCA:
    ◦ Level
    ◦ LFO Modulation Depth
    ◦ Velocity Sense
  • ENV-1(VCF):
    ◦ Attack Time
    ◦ Decay Time
    ◦ Sustain Level
    ◦ Release Time
    ◦ Key Follow (On/Off)
  • ENV-2 (VCF/VCA):
    ◦ Attack Time
    ◦ Decay Time
    ◦ Sustain Level
    ◦ Release Time
    ◦ Key Follow (On/Off)
  • Effect:
    ◦ Type (OVERDRIVE, DISTORTION, METAL, FUZZ, CRUSHER, PHASER)
    ◦ TONE
    ◦ DEPTH
  • Delay/Chorus:
    ◦ Type (DELAY, PANNING DELAY, CHORUS 1, CHORUS 2, FLANGER, DELAY + CHORUS)
    ◦ TIME
    ◦ LEVEL
  • Reverb:
    ◦ Type (AMBIENCE, ROOM, HALL 1, HALL 2, PLATE, MODULATION)
    ◦ TIME
    ◦ LEVEL
  • Controller:
    ◦ BEND SENS PITCH
    ◦ BEND SENS FILTER
    ◦ MOD SENS PITCH
    ◦ MOD SENS FILTER
    ◦ PORTAMENTO
    ◦ LEGATO (ON, OFF)
    ◦ BEND RANGE
    ◦ BEND GAIN (1, 2, 3, 4)
    ◦ TEMPO SYNC (ON, OFF)
    ◦ KEY ASSIGN (POLY, MONO, UNISON)
    ◦ KEY HOLD (ON, OFF)
    ◦ OCTAVE (-3, -2, -1, 0, +1, +2, +3)
    ◦ CONDITION
  • Arpeggio:
    ◦ Arpeggio Mode (UP, DOWN, U&D, RND)
    ◦ Arpeggio Range (1, 2, 3, 4)
  • Tune: 430 Hz--450 Hz
  • Plug-Out Hardware: SYSTEM-8
  • Plug-In Formats:
    ◦ VSTi 2.4 (64 bits) * Windows only
    ◦ VSTi 3.6 (64 bits)
    ◦ AU
    ◦ AAX
  • Sampling Frequency: 44.1 kHz, 48 kHz
  • Patches Preset: 64

System Requirements :

Mac OS :

  • OS: macOS™ 10.10.5 or later
  • Host Application:
    ◦ VST instruments (VSTi) version: VST 3.6 compatible
    ◦ Audio Units (AU) version: V2 Audio Units compatible
  • CPU: Intel® Core™ i5 or better (Quad-core CPU recommended)
  • RAM: 4 GB or more
  • Hard Disk: 100 MB or more
  • Display Resolution and Colours: 1280 x 800 dots or higher, 16.7 million colors or more
  • Other: You'll need Internet connectivity to activate this software. The SYSTEM-8 driver must be installed on your computer to connect this software to the SYSTEM-8.

Windows :

  • Microsoft® Windows® 7 SP1
  • Microsoft® Windows® 8/8.1
  • Microsoft® Windows® 10
    ◦ Incompatible with Windows® RT, Windows® Phone or virtual machines such as Hyper-V, Virtual PC
  • Host Application: VST instruments (VSTi) version: VST 2.4/3.6 compatible
  • CPU: Intel® Core™ i5 or better (Quad-core CPU recommended)
  • RAM: 4 GB or more
  • Hard Disk: 100 MB or more
  • Display Resolution and Colours: 1280 x 800 dots or higher, 24 bits Full Color or more

Other: You'll need Internet connectivity to activate this software. You'll need Adobe Reader (available free of charge) in order to read the online help. The SYSTEM-8 driver must be installed on your computer to connect this software to the SYSTEM-8.

Schrijf uw eigen review
U plaatst een review over:Roland Cloud Jupiter-8 (download)